CPM-700 COUNTER SURVEILLANCE PROBE/MONITOR

The security world's most popular countermeasures (TSCM) mulit-function sweep kit

The CPM-700 is used throughout the world by federal, state and local law enforcement agencies. It is the most mentioned walk-around sweep unit used by almost all professional corporate, industrial and governmental countermeasures sweep teams.

The CPM-700 is a broadband receiver designed to detect and locate all major types of electronic surveillance devices including room, phone, body-worn bugs, video transmitters, and tape recorders. Broadband receivers such as the CPM-700 provide a very important cost-effective tool for professional sweep teams, government security personnel, and private citizens with important security needs. The CPM-700 can rapidly detect and locate transmitted signals, while being very easy to learn to use. The CPM-700 sweep kit includes a custom Cordura case that contains all items necessary to conduct a professional sweep. There are several "imitations" of the CPM-700 on the market because of its success as a product. While some of these copies may be cheaper, they do not provide the frequency performance and sensitivity of the CPM-700. We guarantee it!

The CPM-700 Advantages

Portable Sweep Kit - provides everything needed to perform a professional sweep; fits inside a standard briefcase.

Multi-Functional Utility - comes with probes to detect RF transmitters (audio and video), carrier current transmitters, and telephone bugs. Probes also available to detect for infrared transmitters, tape recorders, and acoustic leakage. Various kits can be obtained that best suites your needs and budget.

Wideband Coverage - from 200Hz to over 3GHz with no holes or gaps.

Monitor Mode - after a sweep, the alarm monitor (silent or audible alert) guards against new devices brought in or remote control activation of surveillance devices.

Auxiliary Audio Input - allows user to listen to telephones or lines for "hotmikes," hookswitch by-pass and "infinity" bugs. Unknown wires and cables can be tested for wired microphones.

Specifications

R.F. Probe:
• Gain: 20dB nominal frequency
• Response: 50kHz-2GHz ±3dB 3GHz-10dB
• Sensitivity: -62dBm (1 segment) -85dBm M.D.L.

VLF Probe:
• Frequency response: 15kHz-1MHz-3dB
• MAX input voltage: 300 VAC 50-60Hz
• Isolation: 1500 VAC 60Hz
• Sensitivity: -38dBm (1 segment) -60 M.D.L.

Audio Amplifier:
• Input impedance: 50K Ohm balanced
• Input range: 1.7uV-10V (135dB) AGC
• Dynamic range: 100dB (high and low gain)
• Frequency response:100Hz- 15kHz±3dB (filtered) 500Hz-24dB/octave, 2.5kHz-18dB/octave

Headphone Output: 5Vp-p 220  
• Record Out: 25 mVp-p nominal with AGC

Display:
• LCD bargraph: 18 segment with pulsing single segment trip point
• 50dB dynamic range (1 segment High Gain to MAX Low Gain)
• Alert output: 2.8kHz tone or silent red LED at 2Hz
• Remote output: N.O. contact (300mA 25V MAX)

Battery:
• 8 ea. MN1500 AA Alkaline - Life 10-16 hrs
• (Optional) 8 ea. 550mAh NiCad - life 3-5 hrs per charge
• Low battery indicator: approx. 10% remaining power

AC adpter/Charger:
• Input: 95-l30VAC 50-60Hz, or 200-275VAC 50-60Hz
• Output: 12VDC with 500mA NiCad recharge Time: 8-10 hrs

CPM-700 Unit:
• Size: 9 1/8 x 6 1/8 x 1 3/4 in, 23.2 x 15.6 x 4.4 cm
• Weight: 39 oz, 1.1 kg

Carry Case with all standard Items:
• Size: 16 3/8 x 11 1/4 x 3 in, 41.6 x 28.6 x 7.6cm
• Weight: 7 lbs, 3.18 kg

	Optional MPA-700 Telephone Probe An advanced multi-function probe that lets the CPM connect to just about any type of telephone system to probe the lines for bugs and wiretaps. The multi-function modular phone adapter set gives the CPM the ability to test a location's phone wiring for surveillance devices. Simple and easy to use.
	Optional MLP-700 CPM Magnetic Leakage Probe MLP-700 enables the operator to detect and locate magnetic recording devices such as audio or video tape recorders. This highly sensitive probe is designed just for the detection and location or hidden audio and video recording systems.
	Optional ALP700 Acoustic Leakage Probe With the Acoustic Leakage Probe, the operator can determine the vulnerability of acoustic leakage by placing the ALP-700 against structural objects such as walls or windows.
	Optional Broadband Microwave Probe (BMP-1200) Extends the range of the CPM-700 to 12GHz for detection of modern higher frequency eavesdropping devices. The BMP-1200 is sold as a CPM-700 deluxe upgrade which includes an Acoustic Leakage Probe for testing acoustic vulnerabilities, an RF Sniffer Probe for better detection in RF rich environments, and a briefcase size hard-shell carrying case better suited for traveling for the CPM-700 and accessories
	Optional Countermeasures Amplifier (CMA-100) The Countermeasures Amplifier (CMA-100) is a high gain audio amplifier used to detect and identify certain types of surveillance devices attached to building wiring such as telephone wiring, LAN and server systems, AC Power, Alarm wire etc. The CMA-100 is designed to provide flexible features and will prove to be very useful in many situations.

Basic unit starts at £1,400.00 UK/$2,200 US - please call for more information